WE ARE FULLY OPERATIONAL | ALL STORES - PICK UP & DELIVERY
WE ARE FULLY OPERATIONAL | ALL STORES - PICK UP & DELIVERY
ROADVISION Stealth RDL2870 LED Driving Light Set 10-30V RECT

ROADVISION Stealth RDL2870 LED Driving Light Set 10-30V RECT

SKU: RDL2870

$159.99
Description

ROADVISION LED Driving Light Set 10-30V RECT


The ROADVISION LED Dimmer Control Switch is designed for use on all Roadvision Next Generation Light Bars.  

Change the brightness of the lights from 50% to 100% output, without affecting the light colour. The dimmer control switch allows you to set the light mood and it’s a simple plug and play installation.

Note: Suitable for positive or negative switched head lamp systems.  

 

PICK UP & PHONE ENQUIRIES WELCOME

Despatched within 24hrs of payment being received.

 

 

 

FITTING INSTRUCTIONS

 

  1. Find a suitable flat location on the dash to mount the Dimmer Controller.
  2. If required pre-drill a hole for the cable to pass through the dash or alternatively pass the cable through an existing opening.
  3. Using either the 3M double sided tape or M4 screws fix the controller bracket to the dash.
  4. Pass the two wires through a grommet in the vehicle firewall making sure the cables will not rub on any sharp edges.
  5. Connect the 4 pin LEDLinkTM twist lock plug to the matching socket from your Roadvision Next Generation LED Light Bar.
  6. For vehicles fitted with HB3 or H4 bulbs plug the relevant piggy back connector into the high beam lead from the dimmer controller. (part numbers; HB3 – RPBCHB3 or H4 – RPBCH4 both sold separately).
  7. Unplug the vehicles head lamp plug (high beam) from the back of one of the head lamp bulbs and plug the piggy back connector into both the globe and vehicle harness.
  8. For vehicles where a piggy back connector cannot be installed identify the positive high beam feed and connect the red wire connect the black wire to the negative feed to the high beam. Ensure to solder or use an appropriate crimp terminal and insulate the bare wires with heat shrink or electrical tape.
  9. Connect the Roadvision Next Generation light bars 2 pin Deutsch or ATP plug directly to the battery with an appropriate fuse installed on the positive feed. (part numbers; Deutsch – RPCDT3M or ATP – RPCATP3M both sold separately).
  10. Secure all access wire to the vehicle.EASY TO FIT…

 

OPERATION

  1. Turn On the vehicle ignition and high beams ON.
  2. ON/OFF switch (1) will illuminate Blue on Dimmer Controller unit is in standby mode.
  3. Push the ON/OFF (1) switch to turn light bar ON ON/OFF switch & dimmer knob (2) will illuminate white when ON.
  4. With light bar ON rotate dimmer knob (2) clockwise to increase brightness counter clockwise to decrease brightness.

 

Specifications

 

 

 
 
 

RANGE SPECIFICATIONS

KEY SPECIFICATIONS
SKU RDL2870
Brand ROADVISION
Shipping Weight 0.500000kg
Shipping Width 0.240m
Shipping Height 0.100m
Shipping Length 0.280m
Shipping Cubic 0.006720000m3
Unit Of Measure ea
PACKAGE CONTENT

 

  • 1 x Dimmer Control Switch

 

Delivery & Returns
PICKUP & SHIPPING


Pick-up locations:


VICTORIA

  • 31 Shirley Way, Epping 3076
    Tel: (03) 9357-0306
  • Unit 1, 7 Tarmac Way, Pakenham 3810
    Tel: (03) 7043-1133


QUEENSLAND

  • Unit 5, 1927 Ipswich Road, Rocklea 4106
    Tel: (07) 3275-2132
  • 25 Torres Crescent, North Lakes 4509
    Tel: (07) 2112-9100
  • 2, 92 Link Crescent, Coolum Beach QLD 4573
    TelL: (07) 2142-8899


NEW SOUTH WALES

  • Unit 2, 31-33 Lyn Parade, Prestons 2170
    Tel: (02) 9136-0000


WESTERN AUSTRALIA

  • 41 Horus Bend, Bibra Lake 6163
    Tel: (08) 6385-6333


SOUTH AUSTRALIA

  • Unit 2, 28-30 Hudson Road, Mawson Lakes 5095
    Tel: (08) 7082-2844


All items are shipped within 24 hours of order payment receipt, except; on weekends, as mutually agreed, during high-volume periods such as holiday and promotion periods, or as may be otherwise stated. 

Free pick-up (click and collect) is available from all locations listed above. Please contact us to confirm stock is available prior to your arrival. You will need to present a government-issued I.D., for all prepaid pick-ups. 

Should you choose free pick-up and your item is not in stock at your chosen location, a free stock transfer is available (for most items). Stock transfers occur on a weekly basis and will require additional handling time. 

Items can be combined to reduce shipping costs.

Some remote areas will incur additional shipping charges. These include, but are not limited to; N.T., Far North QLD, and remote W.A. If you live in a remote area, please contact us to confirm whether additional shipping charges will apply to your order. 



Should you require any additional information, click here to email our customer service team, or phone your nearest OCAM 4x4 Accessories store.

 

RETURN & WARRANTY

 

WARRANTY

For your total confidence, OCAM offers a 1-year warranty on this product. We place a high value on customer service and aim to ensure you are completely satisfied with your purchase. If you require any assistance with your product, please contact us.

 

RETURNS

 

CHANGED YOUR MIND?

No problem! You may return or exchange any product within 30 days, as long as the item is in resalable condition and is returned in its original packaging. You will be responsible for the original and return shipping charges and a restocking fee of 10%. This also applies to orders cancelled during transit. If your original purchase price includes shipping, please contact us to confirm the original shipping cost. A refund, credit or replacement will be issued after we have received the package and confirm the item is in a resalable condition. Returns will not be accepted if you contact us after 30 days of receiving the item.

 


FAULTY OR INCORRECT ITEM?

The item needs to be returned and will be replaced or a full refund or credit provided. Please contact us ASAP if you would like to make a claim.

 


WHAT CAN BE RETURNED?

All our products are returnable.

 


WHEN DO ITEMS NEED TO BE RETURNED BY?

Within 30 days of receipt. Returns will not be accepted if you contact us after 30 days of receiving the item.


 

HOW TO RETURN ITEMS?

By post, courier or visit personally. 

 

 

WHERE TO RETURN ITEMS?

To your nearest OCAM 4x4 Accessories store. 

 


PACKAGING MATERIALS?

Items need to be returned in original packaging.

 


ADDITIONAL NOTES

If the product is damaged during installation or due to a lack of ongoing maintenance, we are not responsible and will not issue a refund or credit.

When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation. If you notice any damages or defects, please contact us ASAP.

Before any returns or exchanges, please contact our customer service representatives via email at hello@ocam.com.au. Please include your order number and specific description of damage/problem, photos and a clear explanation of your reason. If the return is authorised, you will receive an email with return instructions. All emails will be replied to within 24 business hours.

 

Reviews
Be The First To Review This Product!

Help other The OCAM Group Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Description

ROADVISION LED Driving Light Set 10-30V RECT


The ROADVISION LED Dimmer Control Switch is designed for use on all Roadvision Next Generation Light Bars.  

Change the brightness of the lights from 50% to 100% output, without affecting the light colour. The dimmer control switch allows you to set the light mood and it’s a simple plug and play installation.

Note: Suitable for positive or negative switched head lamp systems.  

 

PICK UP & PHONE ENQUIRIES WELCOME

Despatched within 24hrs of payment being received.

 

 

 

FITTING INSTRUCTIONS

 

  1. Find a suitable flat location on the dash to mount the Dimmer Controller.
  2. If required pre-drill a hole for the cable to pass through the dash or alternatively pass the cable through an existing opening.
  3. Using either the 3M double sided tape or M4 screws fix the controller bracket to the dash.
  4. Pass the two wires through a grommet in the vehicle firewall making sure the cables will not rub on any sharp edges.
  5. Connect the 4 pin LEDLinkTM twist lock plug to the matching socket from your Roadvision Next Generation LED Light Bar.
  6. For vehicles fitted with HB3 or H4 bulbs plug the relevant piggy back connector into the high beam lead from the dimmer controller. (part numbers; HB3 – RPBCHB3 or H4 – RPBCH4 both sold separately).
  7. Unplug the vehicles head lamp plug (high beam) from the back of one of the head lamp bulbs and plug the piggy back connector into both the globe and vehicle harness.
  8. For vehicles where a piggy back connector cannot be installed identify the positive high beam feed and connect the red wire connect the black wire to the negative feed to the high beam. Ensure to solder or use an appropriate crimp terminal and insulate the bare wires with heat shrink or electrical tape.
  9. Connect the Roadvision Next Generation light bars 2 pin Deutsch or ATP plug directly to the battery with an appropriate fuse installed on the positive feed. (part numbers; Deutsch – RPCDT3M or ATP – RPCATP3M both sold separately).
  10. Secure all access wire to the vehicle.EASY TO FIT…

 

OPERATION

  1. Turn On the vehicle ignition and high beams ON.
  2. ON/OFF switch (1) will illuminate Blue on Dimmer Controller unit is in standby mode.
  3. Push the ON/OFF (1) switch to turn light bar ON ON/OFF switch & dimmer knob (2) will illuminate white when ON.
  4. With light bar ON rotate dimmer knob (2) clockwise to increase brightness counter clockwise to decrease brightness.

 

 

 

 
 
 

RANGE SPECIFICATIONS

SKU RDL2870
Brand ROADVISION
Shipping Weight 0.5000kg
Shipping Width 0.240m
Shipping Height 0.100m
Shipping Length 0.280m
Shipping Cubic 0.006720000m3
Unit Of Measure ea
PICKUP & SHIPPING


Pick-up locations:


VICTORIA

  • 31 Shirley Way, Epping 3076
    Tel: (03) 9357-0306
  • Unit 1, 7 Tarmac Way, Pakenham 3810
    Tel: (03) 7043-1133


QUEENSLAND

  • Unit 5, 1927 Ipswich Road, Rocklea 4106
    Tel: (07) 3275-2132
  • 25 Torres Crescent, North Lakes 4509
    Tel: (07) 2112-9100
  • 2, 92 Link Crescent, Coolum Beach QLD 4573
    TelL: (07) 2142-8899


NEW SOUTH WALES

  • Unit 2, 31-33 Lyn Parade, Prestons 2170
    Tel: (02) 9136-0000


WESTERN AUSTRALIA

  • 41 Horus Bend, Bibra Lake 6163
    Tel: (08) 6385-6333


SOUTH AUSTRALIA

  • Unit 2, 28-30 Hudson Road, Mawson Lakes 5095
    Tel: (08) 7082-2844


All items are shipped within 24 hours of order payment receipt, except; on weekends, as mutually agreed, during high-volume periods such as holiday and promotion periods, or as may be otherwise stated. 

Free pick-up (click and collect) is available from all locations listed above. Please contact us to confirm stock is available prior to your arrival. You will need to present a government-issued I.D., for all prepaid pick-ups. 

Should you choose free pick-up and your item is not in stock at your chosen location, a free stock transfer is available (for most items). Stock transfers occur on a weekly basis and will require additional handling time. 

Items can be combined to reduce shipping costs.

Some remote areas will incur additional shipping charges. These include, but are not limited to; N.T., Far North QLD, and remote W.A. If you live in a remote area, please contact us to confirm whether additional shipping charges will apply to your order. 



Should you require any additional information, click here to email our customer service team, or phone your nearest OCAM 4x4 Accessories store.

 

RETURN & WARRANTY

 

WARRANTY

For your total confidence, OCAM offers a 1-year warranty on this product. We place a high value on customer service and aim to ensure you are completely satisfied with your purchase. If you require any assistance with your product, please contact us.

 

RETURNS

 

CHANGED YOUR MIND?

No problem! You may return or exchange any product within 30 days, as long as the item is in resalable condition and is returned in its original packaging. You will be responsible for the original and return shipping charges and a restocking fee of 10%. This also applies to orders cancelled during transit. If your original purchase price includes shipping, please contact us to confirm the original shipping cost. A refund, credit or replacement will be issued after we have received the package and confirm the item is in a resalable condition. Returns will not be accepted if you contact us after 30 days of receiving the item.

 


FAULTY OR INCORRECT ITEM?

The item needs to be returned and will be replaced or a full refund or credit provided. Please contact us ASAP if you would like to make a claim.

 


WHAT CAN BE RETURNED?

All our products are returnable.

 


WHEN DO ITEMS NEED TO BE RETURNED BY?

Within 30 days of receipt. Returns will not be accepted if you contact us after 30 days of receiving the item.


 

HOW TO RETURN ITEMS?

By post, courier or visit personally. 

 

 

WHERE TO RETURN ITEMS?

To your nearest OCAM 4x4 Accessories store. 

 


PACKAGING MATERIALS?

Items need to be returned in original packaging.

 


ADDITIONAL NOTES

If the product is damaged during installation or due to a lack of ongoing maintenance, we are not responsible and will not issue a refund or credit.

When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation. If you notice any damages or defects, please contact us ASAP.

Before any returns or exchanges, please contact our customer service representatives via email at hello@ocam.com.au. Please include your order number and specific description of damage/problem, photos and a clear explanation of your reason. If the return is authorised, you will receive an email with return instructions. All emails will be replied to within 24 business hours.

 

Be The First To Review This Product!

Help other The OCAM Group Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category
Others Also Bought