WE ARE FULLY OPERATIONAL | ALL STORES - PICK UP & DELIVERY
WE ARE FULLY OPERATIONAL | ALL STORES - PICK UP & DELIVERY
sharpetooling 3xFiner Hubnut Adjustment Tool For Toyota Landcruiser 40, 55, 60, 70, 80, 105 Series

sharpetooling 3xFiner Hubnut Adjustment Tool For Toyota Landcruiser 40, 55, 60, 70, 80, 105 Series

SKU: ST-3xF

$179.00
Description

sharpetooling 3xFiner Hubnut Adjustment Tool For Toyota Landcruiser 40, 50, 60, 70, 80 & 105 Series


MADE IN AUSTRALIA


Suits: Landcruiser 40, 55, 60, 75/76/78/79, 80 and 105 series, with rear wheel full floating hub bearings.

 


Get 3 times finer adjustment of the rear bearing for clearance and an absolutely perfect preload, every time!!


 


Designed, engineered and certified for ON and OFF road use, the 3xFiner hubnut is direct replacement of the factory fitted Toyota rear wheel bearing hubnut.

 

There has never been a perfect bearing preload for the Landcruiser until now!!!

 

The 3xF hubnut has three times more lock screw setting holes in comparison to the factory nut, therefore, giving three times as many options for setting the bearing preload. The Toyota hubnut has six holes, whereas the 3xF hubnut has eighteen holes.

 

The 3xF hubnut is very easy to use; simply remove the factory wheel bearing hubnut and fit the 3xF hubnut in the same manner as the factory item. However the 3xF hubnut gives the user 3 times finer adjustment of the rear bearing which will get the clearance and preload absolutely perfect every time.

 

A custom triangular shaped tool is included in the 3xF hubnut kit to allow the user to apply torque to the nut to seat the bearings in place and set the correct pre load of your choosing.

 

Your exisiting lock screws will be reused to lock the nut into place. If you do wish to replace the lock screws, Toyota can supply the screws – Part number 42419-60011.

 

Materials and Manufacture

In direct comparison to the die cast mild steel factory hubnut, the 3xF hubnut is a superior design, which allows three time finer adjustment of the wheel bearings and is CNC machined from a superior material - 4140 billet chromoly.

 

Chromoly has a significantly higher strength to weight ratio than mild steel.

 

The testing process has produced proven data to international standards that the 3xFiner hubnut is 1.5+ times stronger than the factory component. There is no doubt that 3xFiner hubnut will not let you down.

 

Our manufacturing shop in Adelaide produces the 3xF hubnut on CNC lathes and mills which produce components in a highly consistent manner with perfect surface finishes.

 

During the production process we ensure the internal thread on the hub nut is to the exact standards set by Toyota. To check consistency on internal threads we use a GO/NO GO plug gauge which has been manufactured by SG Pretty (gauge specialists) in Melbourne Australia.

 

A system of thread classes, each representing a comparative degree of tightness, has been established and universally adopted, to provide manufacturers and users of threaded products with a common language of specification. The thread classes designate minimum and maximum pitch diameters for internal and external threads.

 

When threaded parts are mated, the two parts must assemble with a degree of tightness dictated by the use of the fastener, in the case of the Toyota Hubnut the thread class is ‘H6’.

 

With the internal thread of the 3xF hubnut being the critical machined aspect of the component we use the GO/NOGO gauge to ensure all 3xFiner threads are machined within the tolerances which meet the H6 standard.

 

The 3xF hubnut has been confirmed as a superior product in comparison to the factory component. The metallurgical analysis and strength testing has been conducted by Bureau Veritas’s asset integrity and reliability division who are specialists in component engineering and development for the aerospace, mining and the automotive industries.

 

Over all application analysis and Automotive Engineering approval has been completed by Phil Degenhardt from Motiv Engineering in Adelaide.

 

When you buy a 3xF Hubnut kit, you buy a quality AUSTRALIAN MADE & DEVELOPED product which will not let you down.

 

 

 

Check fitment guide below to confirm suitability for your vehicle. 
(If you're browsing on a mobile phone, use landscape view to see complete chart)  
 

MODEL SERIES YEARS VARIANT

LANDCRUISER

40 Series

01/1979-10/1984

BJ40, BJ42, FJ40, FJ45, FJ55, HJ45, HJ47

LANDCRUISER

60 Series

08/1980-12/1989

FJ60, FJ62, HJ60, HJ61

LANDCRUISER 70 Series 01/1979-On BJ70, BJ73, BJ74, FJ70, FJ73, FJ75, FZJ70, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ73, HZJ75, HZJ78, HZJ79, PZJ70, VDJ76, VDJ78, VDJ79

LANDCRUISER

80 Series

01/1990-12/1997

FJ80, FZJ80, HDJ80, HZJ80

LANDCRUISER 105 Series 01/1998-08/2007 FZJ105 HZJ105

 


 

PICK UP & PHONE ENQUIRIES WELCOME

Despatched within 24hrs of payment being received

 

Specifications
KEY SPECIFICATIONS
SKU ST-3xF
Brand sharpetooling
Shipping Weight 1.000000kg
Shipping Width 0.200m
Shipping Height 0.150m
Shipping Length 0.200m
Shipping Cubic 0.006000000m3
PACKAGE CONTENT
Delivery & Returns
PICKUP & SHIPPING


Pick-up locations:


VICTORIA

  • 31 Shirley Way, Epping 3076
    Tel: (03) 9357-0306
  • Unit 1, 7 Tarmac Way, Pakenham 3810
    Tel: (03) 7043-1133


QUEENSLAND

  • Unit 5, 1927 Ipswich Road, Rocklea 4106
    Tel: (07) 3275-2132
  • 25 Torres Crescent, North Lakes 4509
    Tel: (07) 2112-9100
  • 2, 92 Link Crescent, Coolum Beach QLD 4573
    TelL: (07) 2142-8899


NEW SOUTH WALES

  • Unit 2, 31-33 Lyn Parade, Prestons 2170
    Tel: (02) 9136-0000


WESTERN AUSTRALIA

  • 41 Horus Bend, Bibra Lake 6163
    Tel: (08) 6385-6333


SOUTH AUSTRALIA

  • Unit 2, 28-30 Hudson Road, Mawson Lakes 5095
    Tel: (08) 7082-2844


All items are shipped within 24 hours of order payment receipt, except; on weekends, as mutually agreed, during high-volume periods such as holiday and promotion periods, or as may be otherwise stated. 

Free pick-up (click and collect) is available from all locations listed above. Please contact us to confirm stock is available prior to your arrival. You will need to present a government-issued I.D., for all prepaid pick-ups. 

Should you choose free pick-up and your item is not in stock at your chosen location, a free stock transfer is available (for most items). Stock transfers occur on a weekly basis and will require additional handling time. 

Items can be combined to reduce shipping costs.

Some remote areas will incur additional shipping charges. These include, but are not limited to; N.T., Far North QLD, and remote W.A. If you live in a remote area, please contact us to confirm whether additional shipping charges will apply to your order. 



Should you require any additional information, click here to email our customer service team, or phone your nearest OCAM 4x4 Accessories store.

 

RETURN & WARRANTY

 

WARRANTY

For your total confidence, OCAM offers a 1-year warranty on this product. We place a high value on customer service and aim to ensure you are completely satisfied with your purchase. If you require any assistance with your product, please contact us.

 

RETURNS

 

CHANGED YOUR MIND?

No problem! You may return or exchange any product within 30 days, as long as the item is in resalable condition and is returned in its original packaging. You will be responsible for the original and return shipping charges and a restocking fee of 10%. This also applies to orders cancelled during transit. If your original purchase price includes shipping, please contact us to confirm the original shipping cost. A refund, credit or replacement will be issued after we have received the package and confirm the item is in a resalable condition. Returns will not be accepted if you contact us after 30 days of receiving the item.

 


FAULTY OR INCORRECT ITEM?

The item needs to be returned and will be replaced or a full refund or credit provided. Please contact us ASAP if you would like to make a claim.

 


WHAT CAN BE RETURNED?

All our products are returnable.

 


WHEN DO ITEMS NEED TO BE RETURNED BY?

Within 30 days of receipt. Returns will not be accepted if you contact us after 30 days of receiving the item.


 

HOW TO RETURN ITEMS?

By post, courier or visit personally. 

 

 

WHERE TO RETURN ITEMS?

To your nearest OCAM 4x4 Accessories store. 

 


PACKAGING MATERIALS?

Items need to be returned in original packaging.

 


ADDITIONAL NOTES

If the product is damaged during installation or due to a lack of ongoing maintenance, we are not responsible and will not issue a refund or credit.

When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation. If you notice any damages or defects, please contact us ASAP.

Before any returns or exchanges, please contact our customer service representatives via email at hello@ocam.com.au. Please include your order number and specific description of damage/problem, photos and a clear explanation of your reason. If the return is authorised, you will receive an email with return instructions. All emails will be replied to within 24 business hours.

 

Reviews
(5)
3x finer hubnut for toyota landcruiser
By: raybereng354616 on 4 September 2023
Top quality product and Australian made. It will make wheel bearing adjustments more accurate in future
(5)
Hubnut
By: debpete11203173 on 15 February 2023
As a 4WD mechanic I have always wondered why nobody came up with this before !! Great product, well made , Thanks, Peter Reynolds OAM.
(5)
3xfiner
By: blaser300wsm on 18 October 2022
Great product
(5)
3xfiner
By: blaser300wsm on 18 October 2022
Great product
(5)
sharpetooling 3xFiner Hubnut For Toyota Landcruise
By: Matthew Caldwell on 8 December 2021
Excellent item of engineering , easy to install , self explanatory. OCAM are awesome to deal with and will continue to in the future.
(5)
A+++
By: maxtruphe295860 on 15 April 2021
Great product, worked as described, speedy delivery and great communication with OCAM staff.

Write a product review

Description

sharpetooling 3xFiner Hubnut Adjustment Tool For Toyota Landcruiser 40, 50, 60, 70, 80 & 105 Series


MADE IN AUSTRALIA


Suits: Landcruiser 40, 55, 60, 75/76/78/79, 80 and 105 series, with rear wheel full floating hub bearings.

 


Get 3 times finer adjustment of the rear bearing for clearance and an absolutely perfect preload, every time!!


 


Designed, engineered and certified for ON and OFF road use, the 3xFiner hubnut is direct replacement of the factory fitted Toyota rear wheel bearing hubnut.

 

There has never been a perfect bearing preload for the Landcruiser until now!!!

 

The 3xF hubnut has three times more lock screw setting holes in comparison to the factory nut, therefore, giving three times as many options for setting the bearing preload. The Toyota hubnut has six holes, whereas the 3xF hubnut has eighteen holes.

 

The 3xF hubnut is very easy to use; simply remove the factory wheel bearing hubnut and fit the 3xF hubnut in the same manner as the factory item. However the 3xF hubnut gives the user 3 times finer adjustment of the rear bearing which will get the clearance and preload absolutely perfect every time.

 

A custom triangular shaped tool is included in the 3xF hubnut kit to allow the user to apply torque to the nut to seat the bearings in place and set the correct pre load of your choosing.

 

Your exisiting lock screws will be reused to lock the nut into place. If you do wish to replace the lock screws, Toyota can supply the screws – Part number 42419-60011.

 

Materials and Manufacture

In direct comparison to the die cast mild steel factory hubnut, the 3xF hubnut is a superior design, which allows three time finer adjustment of the wheel bearings and is CNC machined from a superior material - 4140 billet chromoly.

 

Chromoly has a significantly higher strength to weight ratio than mild steel.

 

The testing process has produced proven data to international standards that the 3xFiner hubnut is 1.5+ times stronger than the factory component. There is no doubt that 3xFiner hubnut will not let you down.

 

Our manufacturing shop in Adelaide produces the 3xF hubnut on CNC lathes and mills which produce components in a highly consistent manner with perfect surface finishes.

 

During the production process we ensure the internal thread on the hub nut is to the exact standards set by Toyota. To check consistency on internal threads we use a GO/NO GO plug gauge which has been manufactured by SG Pretty (gauge specialists) in Melbourne Australia.

 

A system of thread classes, each representing a comparative degree of tightness, has been established and universally adopted, to provide manufacturers and users of threaded products with a common language of specification. The thread classes designate minimum and maximum pitch diameters for internal and external threads.

 

When threaded parts are mated, the two parts must assemble with a degree of tightness dictated by the use of the fastener, in the case of the Toyota Hubnut the thread class is ‘H6’.

 

With the internal thread of the 3xF hubnut being the critical machined aspect of the component we use the GO/NOGO gauge to ensure all 3xFiner threads are machined within the tolerances which meet the H6 standard.

 

The 3xF hubnut has been confirmed as a superior product in comparison to the factory component. The metallurgical analysis and strength testing has been conducted by Bureau Veritas’s asset integrity and reliability division who are specialists in component engineering and development for the aerospace, mining and the automotive industries.

 

Over all application analysis and Automotive Engineering approval has been completed by Phil Degenhardt from Motiv Engineering in Adelaide.

 

When you buy a 3xF Hubnut kit, you buy a quality AUSTRALIAN MADE & DEVELOPED product which will not let you down.

 

 

 

Check fitment guide below to confirm suitability for your vehicle. 
(If you're browsing on a mobile phone, use landscape view to see complete chart)  
 

MODEL SERIES YEARS VARIANT

LANDCRUISER

40 Series

01/1979-10/1984

BJ40, BJ42, FJ40, FJ45, FJ55, HJ45, HJ47

LANDCRUISER

60 Series

08/1980-12/1989

FJ60, FJ62, HJ60, HJ61

LANDCRUISER 70 Series 01/1979-On BJ70, BJ73, BJ74, FJ70, FJ73, FJ75, FZJ70, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ73, HZJ75, HZJ78, HZJ79, PZJ70, VDJ76, VDJ78, VDJ79

LANDCRUISER

80 Series

01/1990-12/1997

FJ80, FZJ80, HDJ80, HZJ80

LANDCRUISER 105 Series 01/1998-08/2007 FZJ105 HZJ105

 


 

PICK UP & PHONE ENQUIRIES WELCOME

Despatched within 24hrs of payment being received

 

SKU ST-3xF
Brand sharpetooling
Shipping Weight 1.0000kg
Shipping Width 0.200m
Shipping Height 0.150m
Shipping Length 0.200m
Shipping Cubic 0.006000000m3
PICKUP & SHIPPING


Pick-up locations:


VICTORIA

  • 31 Shirley Way, Epping 3076
    Tel: (03) 9357-0306
  • Unit 1, 7 Tarmac Way, Pakenham 3810
    Tel: (03) 7043-1133


QUEENSLAND

  • Unit 5, 1927 Ipswich Road, Rocklea 4106
    Tel: (07) 3275-2132
  • 25 Torres Crescent, North Lakes 4509
    Tel: (07) 2112-9100
  • 2, 92 Link Crescent, Coolum Beach QLD 4573
    TelL: (07) 2142-8899


NEW SOUTH WALES

  • Unit 2, 31-33 Lyn Parade, Prestons 2170
    Tel: (02) 9136-0000


WESTERN AUSTRALIA

  • 41 Horus Bend, Bibra Lake 6163
    Tel: (08) 6385-6333


SOUTH AUSTRALIA

  • Unit 2, 28-30 Hudson Road, Mawson Lakes 5095
    Tel: (08) 7082-2844


All items are shipped within 24 hours of order payment receipt, except; on weekends, as mutually agreed, during high-volume periods such as holiday and promotion periods, or as may be otherwise stated. 

Free pick-up (click and collect) is available from all locations listed above. Please contact us to confirm stock is available prior to your arrival. You will need to present a government-issued I.D., for all prepaid pick-ups. 

Should you choose free pick-up and your item is not in stock at your chosen location, a free stock transfer is available (for most items). Stock transfers occur on a weekly basis and will require additional handling time. 

Items can be combined to reduce shipping costs.

Some remote areas will incur additional shipping charges. These include, but are not limited to; N.T., Far North QLD, and remote W.A. If you live in a remote area, please contact us to confirm whether additional shipping charges will apply to your order. 



Should you require any additional information, click here to email our customer service team, or phone your nearest OCAM 4x4 Accessories store.

 

RETURN & WARRANTY

 

WARRANTY

For your total confidence, OCAM offers a 1-year warranty on this product. We place a high value on customer service and aim to ensure you are completely satisfied with your purchase. If you require any assistance with your product, please contact us.

 

RETURNS

 

CHANGED YOUR MIND?

No problem! You may return or exchange any product within 30 days, as long as the item is in resalable condition and is returned in its original packaging. You will be responsible for the original and return shipping charges and a restocking fee of 10%. This also applies to orders cancelled during transit. If your original purchase price includes shipping, please contact us to confirm the original shipping cost. A refund, credit or replacement will be issued after we have received the package and confirm the item is in a resalable condition. Returns will not be accepted if you contact us after 30 days of receiving the item.

 


FAULTY OR INCORRECT ITEM?

The item needs to be returned and will be replaced or a full refund or credit provided. Please contact us ASAP if you would like to make a claim.

 


WHAT CAN BE RETURNED?

All our products are returnable.

 


WHEN DO ITEMS NEED TO BE RETURNED BY?

Within 30 days of receipt. Returns will not be accepted if you contact us after 30 days of receiving the item.


 

HOW TO RETURN ITEMS?

By post, courier or visit personally. 

 

 

WHERE TO RETURN ITEMS?

To your nearest OCAM 4x4 Accessories store. 

 


PACKAGING MATERIALS?

Items need to be returned in original packaging.

 


ADDITIONAL NOTES

If the product is damaged during installation or due to a lack of ongoing maintenance, we are not responsible and will not issue a refund or credit.

When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation. If you notice any damages or defects, please contact us ASAP.

Before any returns or exchanges, please contact our customer service representatives via email at hello@ocam.com.au. Please include your order number and specific description of damage/problem, photos and a clear explanation of your reason. If the return is authorised, you will receive an email with return instructions. All emails will be replied to within 24 business hours.

 

(5)
3x finer hubnut for toyota landcruiser
By: raybereng354616 on 4 September 2023
Top quality product and Australian made. It will make wheel bearing adjustments more accurate in future
(5)
Hubnut
By: debpete11203173 on 15 February 2023
As a 4WD mechanic I have always wondered why nobody came up with this before !! Great product, well made , Thanks, Peter Reynolds OAM.
(5)
3xfiner
By: blaser300wsm on 18 October 2022
Great product
(5)
3xfiner
By: blaser300wsm on 18 October 2022
Great product
(5)
sharpetooling 3xFiner Hubnut For Toyota Landcruise
By: Matthew Caldwell on 8 December 2021
Excellent item of engineering , easy to install , self explanatory. OCAM are awesome to deal with and will continue to in the future.
(5)
A+++
By: maxtruphe295860 on 15 April 2021
Great product, worked as described, speedy delivery and great communication with OCAM staff.

Write a product review

More From This Category
sharpetooling 3" (75mm) Gear Stick Extensions For Toyota Landcruiser 70 76 78 79 Series
(6)
$37.50
Sharpetooling Spindle Greasing Tool for All Toyota Landcruiser Vehicles Greaser
(9)
$60.00
sharpetooling 2" (50mm) Gear Stick Extensions For Toyota Landcruiser 70 76 78 79 Series
(9)
$32.50
Sharpetooling 2" & 3" Gear Stick Extensions for Toyota Landcruiser ALL Toyota Manual Gearboxes
(15)
$32.50
Others Also Bought
OCAM Aluminium 3/4 Roof Rack For Pajero Patrol GQ GU Landcruiser 1.85M Cage
(3)
$549.00
Aluminium Flat Roof Rack For Toyota Landcruiser 100/105 Series Alloy Full Length
(2)
$629.00
Kut Snake Flares Front Set for Toyota Landcruiser 76 78 79 Series ABS Kit 2 Pcs Front 2007-2023 (#10)
(4)
$329.00
Premium Bonnet Protector For Toyota Landcruiser 70 76 78 79 Series GXL 2017-10/2023
(14)
Now $84.15
Safari Armax Snorkel For Toyota Landcruiser 71 73 75 76 78 79 Series (03/2007-2023), SS79HPV
(9)
$589.00