Tough Dog EXT Steering Damper For Toyota Landcruiser 80 / 105 Series

$140.00
In Stock
Campbellfield VIC Free Transfer Available
Moorebank NSW In Stock
Rocklea QLD In Stock


Shipping Calculator

Enter suburb or post code to calculate:



Pickup -
95A Merola Way, Campbellfield VIC 3061
5/1927 Ipswich Road, Rocklea QLD 4106
3/33 Heathcote Road, Moorebank NSW 2170
Mon-Fri: 9:00AM-4:30PM

Shipping Calculator

Select country to calculate:



Pickup -
95A Merola Way, Campbellfield VIC 3061
5/1927 Ipswich Road, Rocklea QLD 4106
3/33 Heathcote Road, Moorebank NSW 2170
Mon-Fri: 9:00AM-4:30PM



Tough Dog EXT Steering Damper For Toyota Landcruiser 80 / 105 Series


The very best steering components will assist your driving in so many ways - alleviating driver fatigue is just one of them. 

When you're constantly battling with the steering wheel, especially off-road, it takes its toll. The bumps find their way from the wheels up through the steering, into your hands. To help you making life easier off-road, you'll find the Tough Dog steering dampers will be one of your best driving tools ever.

 

 

 

PICK UP & PHONE ENQUIRIES WELCOME

Despatched within 24hrs of payment being received

 

(SUSP-SD-EXT5001)

SKU SUSP-SD-EXT5001
Brand Tough Dog
Shipping Weight 5.000000kg
Shipping Width 0.600m
Shipping Height 0.080m
Shipping Length 0.050m
Shipping Cubic 0.002400000m3


Pick up locations:

  • VICTORIA
    95A Merola Way, Campbellfield 3061
    Tel: (03) 9357-0306

     
  • QUEENSLAND
    Unit 5, 1927 Ipswich Road, Rocklea 4106
    Tel: (07) 3275-2132

     
  • NEW SOUTH WALES
    Unit 3, 33 Heathcote Road, Moorebank 2170
    Tel: (02) 9136-0000


All items are shipped within 24 hours of payment receipt, except on weekends, as mutually agreed, or as may be otherwise stated.

A free pick-up option is avaialble from our Campbellfield VIC, Rocklea QLD, or Moorebank N.S.W. warehouses. Please contact us to confirm stock is available prior to your arrival. You will need to present a government issued I.D., for all prepaid pick-ups. 

Should you choose free pick up and your item is not in stock at your chosen location, a free stock transfer is available. Stock transfers occur on a weekly basis and will require additional handling time. 

Items can be combined to reduce shipping costs.

Some remote areas will incur additional shipping charges. These include, but are not limited to; N.T., Far North QLD and remote W.A. If you live in a remote area, please contact us to confirm whether additional shipping charges will apply to your order. 



Should you require any additional information, click here to email our customer service team, or phone your nearest OCAM 4x4 Accessories store.

 

 

TOUGH DOG CREDIT & WARRANTY RETURNS POLICY

4Way Suspension Products Pty Ltd (Tough Dog) Credit, Warranty and Refund Policy provides additional benefits to those under Australian Consumer Law. 

Goods for credit or exchange must be returned to the nominated Dealer locations that the goods were collected from within fourteen (14) days of invoice date accompanied by a completed Returns Form. Goods returned for the purpose of warranty claim must also be accompanied by the returns form along with a copy of the customer invoice.

Claims will undergo a two step inspection process. The initial inspection shall be carried out by the dealer location that the goods were originally purchased from. If further inspection is required, the parts must be returned to 4Way Suspension Products Pty Ltd Head Office. Freight charges associated with returning items will be the responsibility of the purchaser except in the instance of incorrect parts supplied as a result of an error by 4Way Suspension products, its employees or its authorized representatives.

Please note that 15% of the total value of the returned goods will be charged in the event that repackaging is required.


 

WARRANTY EXCLUSIONS

  • Parts that have been incorrectly installed
  • Struts that have been assembled with the use of any tool other than hand tools (no rattle guns etc)
  • Load bearing strut bushes that have been tightened while hanging.  Strut bushes must be tightened while the vehicle is on the ground supporting its own load.
  • Interference between shock absorber and other suspension components
  • Parts that have been involved in a motor vehicle accident or have been bent or have been physically damaged by impact of any kind.
  • Parts showing evidence of improper tightening of the mounting bolts causing parts to wear or bend
  • Gripping tool marks (vice grips or multi grips) or any other tool made mark on the polished chrome section of the shock absorber shaft
  • All parts subjected to abuse.
  • All parts used in Off-road or other racing events or activities
  • Any special order parts
  • Parts fitted to vehicles weighing more than original GVM.
  • Please Note: Any components built to a special order or specification outside the catalogue listings is not covered by warranty. This is because the manufacturer is unable to design components to withstand stresses in applications the R&D has not approved.

 


PROOF OF PURCHASE

A Copy of proof of purchase by the retail customer must be attached to the claim including the kilometre reading at the time of fitment (if applicable). Each 4WD Suspension fitted must have a fitting sheet completed and kept on file by either the vehicle owner or the fitment centre performing the work. Failure to produce the fitting sheet may affect the warranty of the product.

 

WARRANTY PERIODS  
53mm Ralph (standard use) 3 Year/unlimited km
53mm Ralph (Commercial Use) 2 Year/unlimited km
45mm Adjustable 3 Year/unlimited km
45mm Adjustable (Comm. use) 2 Year/unlimited km
35mm Nitro Gas Shocks 2 Year/unlimited km
Foam Cell & 40mm Adjustable 3 Year/unlimited km
RTC/EXT/SV Dampers 3 Year/unlimited km
Leaf Springs 3 Year/unlimited km
Coil Springs (up to 2”) 3 Year/unlimited km
Coil Springs (above 2” Lift) 2 Year/unlimited km
Recovery Equipment 3 years (material & manufacture)


 

SELF FIT (DIY) SUSPENSIONS

DIY suspension fitment does not affect the warranty application or term as long as the following conditions are adhered to:

  • A fitting sheet is completed prior to the suspension being fitted and filed for later reference,

  • The Above fitment sheet accurately and clearly includes bottom of rim to wheel arch measurements for all four corners of the vehicle both before, after and at the 500km check service.

  • U-Bolts must be replaced at the time of fitment. U-Bolts are a ‘stretch fit’ item, and should not be torqued to tightness twice. Re-using U-Bolts puts the vehicle and occupants at risk.



WARRANTY LIMITS

4way Suspension Products Pty Ltd’s product warranty is limited to the repair or replacement of defective or faulty parts and does not include any costs incurred in labour for the removal or re-fitment of parts or damage incurred as a result of the product’s fitment.

 

Be The First To Review This Product!

Help other The OCAM Group Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review